Cargard Remote Control 600299

For Cargard T70/650S/850S/950S/950SU & Boatgard BG201 etc.

Cargard Remote Control 4-Button AGC

Battery included

Cargard Remote Control 4-button AGC
Suitable for Car and Boat. Four-button remote control with rolling code (record-protected).

Not waterproof.

Four-button remote control with rolling code (record-protected).

Programming Cargard transmitter
T70c/950s
The alarm control unit can store up to 8 different code transmitter codes. In the event of loss of one
code transmitter, it can be deleted from the alarm's memory by reprogramming the remaining code(s)
the transmitters.
Deleting and changing the code can be done when the alarm is installed in the car as described below.

Description:

1. The alarm must be turned off (deactivated) and all doors, hood and tailgate closed.

2. Get in the car and turn the ignition on and off 5 times at a steady pace within 10 seconds. Leave the ignition on after the 5th turn!

3. The lights in the alarm status panel will now start flashing rapidly.
Press the transmitter button that will control the alarm on the 1st key to be programmed. (You have 10 seconds.)
When the code is accepted, the lights in the status panel turn on steadily for 1 second.

4. Complete the same procedure with the other code transmitters (max. 8) that will be used with this alarm.
(You have an additional 10 seconds for each new transmitter)
NOTE: When reprogramming the transmitter code, all previously programmed
codes!

5. The programming routine will automatically be interrupted 10 seconds after the last code is entered.
programmed or when the ignition is turned off or a door is opened